Easy Application
Installing PPF with precision and perfection
SKU:TPU7017
🎁 Cheer for IBE – Enjoy 16% Off Via Code: IBE26
🚘 Self-Healing : Ultimate Protection for Your Car's Paint
Name
Gloss Light Blue Colored PPF Paint Protection Film
Color
Light Blue
Finish
Gloss PPF
Sku
TPU7017
Fit for
Full vehicle wraps & graphics, architectural signage, buses, cars & vans, mirrors, bumpers, hoods, roofs, vehicle lettering, watercraft, decals & stripes, accents & trim, electronics, skins & more.
Size (mm)
49ft x 5ft(1.52*15m)
Glue
AMERICAN ASHLAND (BOSTIK)
FEATURE
Hydrophobic Properties, Scratch and Stain-Resistant
Expected durability
5-7 years
Aftercare
PH neutral, Avoid wax or solvents
Aging Test 1
No adhesive residue with heat(7 days under 65°C)
Aging Test 2
No adhesive residue without heat(10 days under 65°C)
Application temperature
From +15℃ to +40℃
Shelf Life
2 years(stored in +10°C to +35°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place)
Breaking strength(%)
>200%
Release force (N/25mm)
0.13 (25℃ and 50%)
Initial tack (g/25mm)
903 (26℃ and 64%, GB31125-2014)
Peel Strength (N/25mm)
4.5 (25℃and 42%, GB/T2792-1998)
Holding power (h)
75.09 (25℃ and 50%, GB/T4851-1998)
Shrinkage
5-7 years
Removable
Up to 3 years
Description about TPU light blue car wrap:
Our cutting-edge light blue car wrap is engineered for exceptional vehicle customization. Boasting air-channel release technology, light blue vinyl wrap effortlessly conforms to intricate curves, adapting flawlessly to various smooth, non-porous surfaces. Specifically crafted for vehicle application, it imparts a luxurious chrome-like appearance. Safeguarded by a clear protective layer, your reflective finish remains unblemished throughout the installation process. Upon completion, unveil a mesmerizing spectacle—a resplendent gloss light blue wrap that transcends your vehicle into an awe-inspiring masterpiece. This wrap not only enhances aesthetics but also embodies precision, delivering a flawless finish that captivates attention, elevating your car's allure to a whole new level.
The Gloss Light Blue Colored PPF (Paint Protection Film) is a stylish and high-performance solution designed to enhance and protect your vehicle's exterior. With its soft, glossy light blue hue, this film provides a sleek, refreshing look that adds a subtle touch of color to your car. The glossy finish not only boosts the vehicle's aesthetics but also highlights its contours and body lines, giving it a sophisticated and modern look.
About ALUKOVINYL:
Alukovinyl car wrap provides high-performance PPF film designed to shield your vehicle from scratches, stone chips, and UV damage. With options like gloss ppf , and other colored ppf, Alukovinyl combines style with durability. Our films offer self-healing, long-lasting clarity, and easy maintenance, making Alukovinyl a trusted choice for car owners seeking both protection and a premium finish.
Easy Application
Installing PPF with precision and perfection
Room Temperature: 25 ± 3°C
Humidity: 50 ± 5% RH
Cleanliness: Clean, dust-free, and free of visible suspended particles
Rubber scraper
Buffer
Masking tape
Heat gun
Magnet
Gloves
IRR thermometer
Spray
Towel
Installation fluid
Surface Preparation is Critical:
Wash the vehicle thoroughly to remove dirt, wax, and grease.
Work in a Controlled Environment:
Install in a dust-free, well-lit area.
Use High-Quality Installation Tools:
A squeegee with a felt edge, heat gun, and precision knife are essential. Avoid sharp or metal tools that could scratch the film.
Stretch & Position Carefully:
Aluko’s PPF is highly conformable, but use a heat gun (low-medium heat) to soften the film for complex curves. Overstretching can thin the film—gentle tension is key.
Squeegee from the Center Outward:
Start in the middle and push air/water toward the edges to prevent trapped bubbles. Apply firm, even pressure to ensure full adhesion.
Trim Excess Film Before Final Drying:
Use a fresh, sharp blade for clean cuts. Leave a small margin (1-2mm) near edges to avoid peeling.
Allow Proper Curing Time:
Avoid washing or heavy rain for at least 24-48 hours to let the adhesive fully bond.
Avoid Harsh Chemicals & Automatic Car Washes:
For the first 2 weeks, hand wash only with pH-neutral car shampoo. Avoid strong solvents, waxes, or silicone-based products—they can damage the film’s hydrophobic layer.
Use Heat to Reactivate Self-Healing Properties:
If minor scratches appear, park in sunlight or use warm water to activate the self-repairing top coat.
Regular Maintenance for Longevity:
Use a PPF-safe detailer spray to maintain gloss and prevent contaminants from bonding. Inspect edges periodically to ensure no lifting occurs.
Be the first to recommend this product.