7.5mil Matte Ultra PPF Paint Protection Film

Limited Time Deal ⚡

: :

PPF002

$167.16 ~~$199.00~~ Save $31.84

6 Reviews

🎁 Cheer for IBE – Enjoy 16% Off Via Code: IBE26

🚘 Self-Healing : Ultimate Protection for Your Car's Paint

ETA

Size Chosen: ,Quantity 1

Quantity

Easy Application

Installing PPF with precision and perfection

Surface Preparation is Critical:
Wash the vehicle thoroughly to remove dirt, wax, and grease.
Work in a Controlled Environment:
Install in a dust-free, well-lit area.
Use High-Quality Installation Tools:
A squeegee with a felt edge, heat gun, and precision knife are essential. Avoid sharp or metal tools that could scratch the film.

Stretch & Position Carefully:
Aluko’s PPF is highly conformable, but use a heat gun (low-medium heat) to soften the film for complex curves. Overstretching can thin the film—gentle tension is key.
Squeegee from the Center Outward:
Start in the middle and push air/water toward the edges to prevent trapped bubbles. Apply firm, even pressure to ensure full adhesion.
Trim Excess Film Before Final Drying:
Use a fresh, sharp blade for clean cuts. Leave a small margin (1-2mm) near edges to avoid peeling.

Allow Proper Curing Time:
Avoid washing or heavy rain for at least 24-48 hours to let the adhesive fully bond.
Avoid Harsh Chemicals & Automatic Car Washes:
For the first 2 weeks, hand wash only with pH-neutral car shampoo. Avoid strong solvents, waxes, or silicone-based products—they can damage the film’s hydrophobic layer.
Use Heat to Reactivate Self-Healing Properties:
If minor scratches appear, park in sunlight or use warm water to activate the self-repairing top coat.
Regular Maintenance for Longevity:
Use a PPF-safe detailer spray to maintain gloss and prevent contaminants from bonding. Inspect edges periodically to ensure no lifting occurs.

Customer Reviews

5.0

6 Reviews

100