Easy Application
Installing PPF with precision and perfection
SKU: TPU157
🎁 Cheer for IBE – Enjoy 16% Off Via Code: IBE26
🚘 Self-Healing : Ultimate Protection for Your Car's Paint
Name
TPU Gloss Cold Crystal Light Blue Colored PPF Paint Protection Film
Color
TPU Gloss Cold Crystal Light Blue
SIZE
5ft X 49.5ft (Standard Roll)
SKU
TPU157
Finish
TPU GLOSS
GLUE
AMERICAN ASHLAND (BOSTIK)
BASE MATERIAL
COVESTRO
FEATURE
Hydrophobic Properties, Scratch and Stain-Resistant
Application Type
Wet
UV Resistant
98.5%
Expected durability
5-7 years
HARDNESS
93A
GLOSSINESS
94
THERMAL SELF-HEALING
100%
Tearing Strength
68.52KN/M
peel strength of adhesive layer 20 mil thickness
1420gf/inch
peel strength of adhesive layer 24H
1932gf/inch
Coating Fracture Elongation
112%
tensile strength
22.32Mpa
Elongation at break of PPF
370.23%
About ALUKOVINYL:
Alukovinyl car wrap provides high-performance ppf film designed to shield your vehicle from scratches, stone chips, and UV damage. With options like gloss ppf , and other colored ppf, Alukovinyl combines style with durability. Our films offer self-healing, long-lasting clarity, and easy maintenance, making Alukovinyl a trusted choice for car owners seeking both protection and a premium finish.
Easy Application
Installing PPF with precision and perfection
Room Temperature: 25 ± 3°C
Humidity: 50 ± 5% RH
Cleanliness: Clean, dust-free, and free of visible suspended particles
Rubber scraper
Buffer
Masking tape
Heat gun
Magnet
Gloves
IRR thermometer
Spray
Towel
Installation fluid
Surface Preparation is Critical:
Wash the vehicle thoroughly to remove dirt, wax, and grease.
Work in a Controlled Environment:
Install in a dust-free, well-lit area.
Use High-Quality Installation Tools:
A squeegee with a felt edge, heat gun, and precision knife are essential. Avoid sharp or metal tools that could scratch the film.
Stretch & Position Carefully:
Aluko’s PPF is highly conformable, but use a heat gun (low-medium heat) to soften the film for complex curves. Overstretching can thin the film—gentle tension is key.
Squeegee from the Center Outward:
Start in the middle and push air/water toward the edges to prevent trapped bubbles. Apply firm, even pressure to ensure full adhesion.
Trim Excess Film Before Final Drying:
Use a fresh, sharp blade for clean cuts. Leave a small margin (1-2mm) near edges to avoid peeling.
Allow Proper Curing Time:
Avoid washing or heavy rain for at least 24-48 hours to let the adhesive fully bond.
Avoid Harsh Chemicals & Automatic Car Washes:
For the first 2 weeks, hand wash only with pH-neutral car shampoo. Avoid strong solvents, waxes, or silicone-based products—they can damage the film’s hydrophobic layer.
Use Heat to Reactivate Self-Healing Properties:
If minor scratches appear, park in sunlight or use warm water to activate the self-repairing top coat.
Regular Maintenance for Longevity:
Use a PPF-safe detailer spray to maintain gloss and prevent contaminants from bonding. Inspect edges periodically to ensure no lifting occurs.
Be the first to recommend this product.