currencies

TPU Matte Black Iridescent Gold Color PPF Paint Protection Film

TPU Matte Black Iridescent Gold Color PPF Paint Protection Film

Product Information and Purchasing Options

SKU: TPU199

$319.00

☀️ Enjoy 14% Off  Summer Sale, Enter Code: ALUKO14

🚘 Premium PET Wrap without any Orange Peel 

ETA

✍ NOTE 

  • We prioritize shipping from our U.S. warehouse (ETA: 2–3 working days). If unavailable, your order will automatically ship from our factory (ETA: 3–6 working days)

  • To avoid slight color variations between batches, we recommend ordering an extra 10 feet.

  • Only full 59ft rolls in our Glossy Series include the plastic protective outer layer. For smaller sizes (like 10ft or 16ft), we remove this layer before shipping to guarantee a smooth surface free of air bubbles or creases. Rest assured, this does not affect the quality of the vinyl.

    Note: Orders over 59ft will ship as a full roll plus an additional section (e.g., 69ft = 59ft + 10ft; 79ft = 59ft + 20ft). "

  • Any questions, pls feel free to contact our customer service.  Email:service@alukovinyl.com Phone : +1 5182530711 / +1 (838) 934-1909
Share:

Product information tabs

  • Reviews

Product Images and Video

Product Thumbnail Images

Main Product Images

 Matte Black Iridescent Gold Color PPF
slide image
slide image

Installation Instructions:

✅ Pre Installation Tips

  • Surface Preparation is Critical:
    Wash the vehicle thoroughly to remove dirt, wax, and grease.

  • Work in a Controlled Environment:
    Install in a dust-free, well-lit area.

  • Use High-Quality Installation Tools:
    A squeegee with a felt edge, heat gun, and precision knife are essential. Avoid sharp or metal tools that could scratch the film.

✅ During Installation Tips

  • Stretch & Position Carefully:
    Aluko’s PPF is highly conformable, but use a heat gun (low-medium heat) to soften the film for complex curves. Overstretching can thin the film—gentle tension is key.

  • Squeegee from the Center Outward:
    Start in the middle and push air/water toward the edges to prevent trapped bubbles. Apply firm, even pressure to ensure full adhesion.

  • Trim Excess Film Before Final Drying:
    Use a fresh, sharp blade for clean cuts. Leave a small margin (1-2mm) near edges to avoid peeling.

✅ Care Tips

  • Allow Proper Curing Time:
    Avoid washing or heavy rain for at least 24-48 hours to let the adhesive fully bond.

  • Avoid Harsh Chemicals & Automatic Car Washes:
    For the first 2 weeks, hand wash only with pH-neutral car shampoo. Avoid strong solvents, waxes, or silicone-based products—they can damage the film’s hydrophobic layer.

  • Use Heat to Reactivate Self-Healing Properties:
    If minor scratches appear, park in sunlight or use warm water to activate the self-repairing top coat.

  • Regular Maintenance for Longevity:
    Use a PPF-safe detailer spray to maintain gloss and prevent contaminants from bonding. Inspect edges periodically to ensure no lifting occurs.

Be the first to recommend this product.